The lowest price for heating does not have to mean compromising on the quality of your indoor climate. Many people think that an infrared panel outlet only offers outdated models or B-grade products, but the …

The lowest price for heating does not have to mean compromising on the quality of your indoor climate. Many people think that an infrared panel outlet only offers outdated models or second-rate products, but the reality in 2026 is that smart buyers will actually find the most advanced technology here for a fraction of the new price.

It is understandable that you have doubts about the technical condition or the warranty when discounts run high. After all, you want a warm home without the fear of a bad purchase or insufficient wattage. In this guide, you will discover how to purchase high-quality infrared heating at outlet prices, while enjoying the same comfort and energy efficiency as the latest collections. We discuss how to determine the right wattage given a limited selection, why these models are often technically identical to the current standard, and how to immediately lower your energy costs with healthy radiant heat that feels like the natural warmth of the sun.

Save smartly on your heating with the outlet for infrared panels

Switching to modern heating is a wise move for your living comfort and your wallet. Infrared heating offers direct, healthy warmth comparable to the sun's rays. However, many consumers are deterred by the initial investment required for premium brands. This is where outlet infrared panels into play. Shopping at the outlet is not a gamble on quality, but a strategic choice to bring top technology into your home for a fraction of the price. Unlike budget panels from hardware stores, which often have low efficiency, outlet models from renowned brands such as Welltherm or Ecaros offer superior efficiency. What is an infrared panel? Essentially, it is a system that heats objects and people directly rather than the air. High-quality panels from the outlet convert up to 93% of electricity into direct heat, which is essential for an energy-efficient home.

Products do not end up in our outlet because the technology fails. Often, it is due to logistical reasons or aesthetic upgrades. By choosing these second-chance products, you contribute directly to a more sustainable economy. You prevent high-quality materials from sitting on shelves unnecessarily or being recycled when they could last for decades. This circular aspect fits perfectly with Warmteshop’s environmentally conscious vision, in which we strive for a CO2-neutral indoor climate for everyone.

what you can expect from outlet products

In the outlet, you will find various categories of products, each offering its own advantage. Be aware of the following options:

• Packaging damage: These are new panels where only the box was damaged during transport. The panel itself is technically 100% in order and has never been removed from the packaging.
• Discontinued series: Manufacturers regularly renew their collections to make room for the latest design models. However, the technology in these panels remains top-notch.
• Showroom models: These panels were briefly displayed in our physical showrooms. They have been thoroughly checked by our experts for full functionality and safety.

the benefits of branded products over unbranded alternatives

Choosing a branded product in the outlet—infrared panels— offers the reliability you lack with cheap imported panels. A high-quality panel features superior insulation on the back. As a result, heat is radiated forward and does not disappear into the wall or ceiling. This significantly increases energy efficiency. Moreover, brands like Ecaros possess the necessary safety certificates and offer better warranty conditions, even on outlet models. You invest in a long lifespan and a healthy indoor climate, without paying top dollar.

What to look out for when buying outlet infrared panels

Shopping for infrared panels in the outlet requires a slightly different approach than ordering from the regular collection. Because you are dependent on current stock, it is essential that you know exactly what your technical requirements are in advance. After all, you are buying a specific unit that is immediately available. A bad purchase due to incorrect wattage or an awkward size can quickly negate the financial benefit. Therefore, thorough preparation is the key to successfully saving on your heating costs.

In addition to the technical specifications, a physical inspection is important. Always check the length of the supplied cable and the position of the connection. In the outlet, you will sometimes find models specifically designed for wall mounting or ceiling mounting. An infrared panel on the ceiling often distributes heat more efficiently across the floor, but the cabling must be designed for this. Do you have questions about a specific model? Our experts in the showrooms will be happy to help you determine if an outlet deal suits your living situation.

calculating the correct wattage

The most common mistake is underestimating the required power. As a basic rule, we use 20 to 30 watts per cubic meter for supplementary heating. For primary heating in less well-insulated rooms, this can increase. An independent study into the effectiveness of infrared radiation confirms that proper sizing is crucial for achieving the promised energy savings. In an outlet situation, it is wise to choose a heavier panel if in doubt. A panel with more power brings the room up to temperature faster, after which the thermostats switch off the system. This is more efficient than an undersized panel that has to constantly operate at full power without reaching the desired heat.

material and aesthetics in the outlet

The material of the panel determines not only the appearance but also the heat output. Metal panels are robust and heat up very quickly, making them ideal for home offices or hobby rooms. However, in the outlet, you will also regularly find luxury glass panels or an infrared mirror. These are perfect for the bathroom because they prevent condensation and emit healthy, deep heat. Even photo panels with unique prints sometimes appear in the outlet when a collection is updated. This offers you the chance to transform a functional heating element into a personal work of art in your interior, without paying the price of a custom-made panel.

featured deals: from hybrid models to design panels

Those who shop smartly in the outlet for infrared panelslook beyond just the price. The selection in our outlet offers you the chance to bring home technology from top brands that normally falls outside the budget of the average saver. Think of systems that are not only functional but also add aesthetic value to your interior. This often involves unique opportunities for models that rarely appear in regular sales, simply because the demand for these high-quality German products remains consistently high.

alkari and the power of hybrid heating

Alkari hybrid panels are a favorite among connoisseurs looking for a quick heating solution. Unlike standard panels, these models combine infrared radiation with a gentle airflow through convection. This technology is scientifically substantiated by reports demonstrating that targeted radiant heat raises the perceived temperature more efficiently than traditional air heating. In the outlet, you will regularly find the Alkari 500W or the powerful 1200W variants. These are perfect for larger spaces such as a living room or a home office, where you want to quickly create a comfortable climate without starting up the entire central heating system.

ecaros and welltherm: German quality at a discount

Ecaros and Welltherm are known in the industry for their uncompromising build quality. Ecaros design panels transform your heating into a work of art on the wall. Panels from the "Skyline" or "Kiss me" series sometimes appear in the outlet, becoming available for a fraction of the original price due to a collection change. Welltherm, in turn, offers glass panels with a level of finish that meets the highest demands of architects. These brands utilize advanced techniques that ensure even heat distribution across the entire surface, which is essential for the lifespan and energy efficiency of the system.

Complete your system with thermostats

A common misconception is that a cheap outlet panel does not require smart control. By saving on the panel itself, you actually free up budget for a high-quality wireless thermostat. A good control system is the brain of your heating system. It ensures that your outlet infrared panels only consume energy when the room is actually in use. For the Alkari models, we often recommend the accompanying remote control with thermostat function. This allows you to achieve true zone heating, where you manage each room independently and with extreme precision, which will significantly reduce your total energy costs in 2026.

common mistakes when shopping at the outlet

A smart investment in your living comfort starts with making the right choices. Although the infrared panel outlet offers you the unique opportunity to acquire top quality at a lower price, we often see consumers falling into the same traps. Enthusiasm overshadowed by a high discount sometimes overshadows the technical necessity of a specific room. Remember that infrared heating works by heating objects directly, similar to the comforting warmth of the sun. If the source is not powerful enough, that radiation will never reach the furthest corners of your room.

Another often underestimated factor is the mounting method. You will find various models in the outlet, but not every panel is universally applicable. Some panels are specifically designed for wall mounting to create a targeted heat field at seating height. Other models, on the other hand, are optimized for the ceiling to achieve optimal heat distribution across the floor. Ignoring these specifications often leads to uneven heat distribution and a less aesthetically pleasing result in your interior. Therefore, always check whether the mounting hardware in the outlet deal matches your intended location.

the pitfall of the wrong capital

The price per watt is often very attractive at the outlet. However, buying a panel that is too small is a costly mistake that unnecessarily increases your energy bill. When you install a panel with insufficient wattage, the thermostat will never switch off the system because the desired temperature is simply not reached. This results in constant power consumption, whereas a more powerful model would actually rest periodically. In large living rooms, a good distribution of multiple panels is more effective than a single central point. Therefore, always accurately calculate the required power in advance to avoid disappointment and unnecessary energy costs.

safety in the bathroom

Safety always comes first, especially in areas where water and electricity come together. A common mistake is installing a standard outlet panel in the bathroom without paying attention to the IP rating. For zones near a shower or bath, an IP44 rating is the minimum requirement to guarantee splash-proofness. An infrared mirror from the outlet is the ideal solution here. It not only provides healthy radiant heat but also prevents your mirror from fogging up after showering. Despite the simple installation of many models, we always recommend professional connection for bathrooms to ensure electrical safety and proper zone division.

Do you want to avoid making the wrong choice between the available deals? View our current selection immediately and choose an infrared panel that perfectly matches your specific living situation.

Why choose the Warmteshop outlet?

Choosing the infrared panel outlet at Warmteshop means you benefit from the combined expertise of the Infrarood Verwarming Groep. As the market leader in the Benelux, we understand that switching to electric heating is a significant step in many people's personal energy transition. We position ourselves not only as a supplier, but as a reliable guide that leads you to the most efficient solution for your home. Our years of experience with complex projects translate directly into the careful selection of products in our outlet.

Transparency is central to our philosophy. Every panel in our outlet comes with an honest description of its technical and aesthetic condition. You do not have to guess the reason for the discount; we clearly communicate whether it is a showroom model, a discontinued series, or a product with minor packaging damage. This straightforward approach builds trust and prevents unpleasant surprises later on. Furthermore, you can count on fast delivery and customer service that remains available to assist you with technical advice even after the purchase.

expert advice and support

A unique advantage of Warmteshop is our strong local presence. Unlike pure webshops, we have physical showrooms spread across the country. Here, you can experience the comforting warmth of our systems firsthand and receive direct advice on the available outlet models. Our experts are happy to assist you with a professional heat calculation. This ensures that you not only score a great deal but also acquire a system that actually heats your space comfortably. We consider your insulation values ​​and space usage to find the perfect match within the current range.

sustainability and future-oriented heating

Infrared heating is a smart and comfortable upgrade for every modern household. Our systems operate on the basis of radiant heat, which is a healthy way of heating that does not dry out the air or move dust. The technology mimics the natural warmth of the sun, directly heating the people and objects in the room rather than the air. This ensures high living comfort with lower energy consumption, especially when you combine the panels with green electricity or solar panels. By choosing a model from our outlet, you give high-quality products a second life and contribute to a circular economy. Check the current stock in our outlet today – infrared panels – and take the next step towards a carbon-neutral and warm home.

Switch to sustainable heat today with a smart investment

Making your home sustainable doesn't have to cost a fortune if you choose the right strategy. We have seen that, through competitive offers, you can find high-quality technology from top brands such as Welltherm and Ecaros without compromising on comfort or safety. By calculating the correct wattage in advance and taking into account the specific requirements of your space, you make a choice that yields a return for years to come, comparable to the value of sound advice from a mortgage broker like Blackrock Dublin when financing homes.

As part of the Infrared Heating Group, Warmteshop brings more than 18 years of experience in infrared heating. So you are not alone. Our experts in the nationwide showrooms are ready to provide you with expert advice, even when you choose a specific range. This ensures you get a system that perfectly suits your living situation and personal preferences.

Don't wait any longer and take advantage of the opportunity to heat your home with the natural power of the sun. Discover all current deals in our outlet - infrared panels - and start saving on your energy costs immediately. A warm and sustainable home is now more within reach than ever.

Frequently asked questions about infrared outlets

Are outlet infrared panels technically inferior to new panels?

No, outlet infrared panels are technically of the same high quality as the regular collection. Products in the outlet often end up there due to minor packaging damage, collection updates, or because they served briefly as showroom models. Each panel is extensively tested by our experts for safety and heat output before being offered. You therefore benefit from the full technology and efficiency at a lower price.

Do I have a warranty on products from the Warmteshop outlet?

Yes, you receive the full manufacturer's warranty on virtually all products from our outlet. Warmteshop stands for sustainable quality, regardless of whether you buy a model from the latest line or the outlet. The exact warranty period may vary by brand and type, but this is always clearly stated in the product description. This allows you to invest in an energy-efficient future for your home with peace of mind.

Can I install an outlet panel myself or do I need a technician?

You can easily install most standard models yourself thanks to the convenient mounting system and plug connection. However, for specific applications, such as an infrared panel in the bathroom or ceiling mounting with concealed cables, we recommend the assistance of a professional installer. This not only guarantees safety but also ensures the most efficient heat distribution in the room. Our advisors in the showrooms can provide you with comprehensive guidance on this.

Why are some panels in the outlet much cheaper than others?

The price is determined by a combination of the brand, the materials used, and the reason for the outlet status. A metal panel with minor packaging damage has a different discount than a luxury glass design panel from a discontinued series. Power output also plays a role in pricing. As a result, the infrared panel outlet offers a wide range of options for every budget, from functional supplementary heating to high-end design pieces.

Are outlet panels also suitable as primary heating for my home?

Yes, provided the total capacity of the panels is matched to the room's heat demand. Whether a panel comes from the outlet or not has no influence on its capacity to fully heat a home. It is crucial that you have an accurate heat calculation performed, taking into account the insulation value of your home. Our experts are happy to help you determine how many panels you need for a comfortable indoor climate.

What happens if an outlet product does not meet my expectations?

For online purchases in the outlet, the statutory return conditions apply, allowing you to return the product within the cooling-off period. We strive for complete transparency by accurately describing the condition of every outlet product in our webshop. Should a panel not meet your expectations upon receipt, we will work together to find a suitable solution. Our customer service is focused on ensuring your transition to green energy runs as smoothly as possible.

How often is the outlet's stock replenished?

The outlet stock is replenished on an irregular basis, depending on collection changes and incoming showroom models. Because these often involve unique items or small batches, the selection is constantly changing. It therefore pays to visit the outlet infrared panels page regularly if you are looking for a specific deal. In many cases, once it's gone, it's really gone, given the high demand for these affordable, quality solutions.

Can I combine a thermostat with any outlet panel?

Virtually every panel in the outlet can be combined with an external thermostat for optimal energy savings. Whether you choose a simple wireless thermostat or an advanced smart home module, the control works the same as with new models. The use of a thermostat is essential to accurately regulate the temperature and prevent unnecessary power consumption. In our showrooms, we would be happy to advise you on the best thermostat combination for your chosen outlet panel.

Tags

design panels sustainable living energy saving infrared panels IP rating outlet outlet - infrared panels smart saving heating wattage calculation

• Share with:
• WhatsApp
• Part
• X
• Pin it
• Messenger
• E-mail

---