What if you could bring the sun's beneficial warmth directly inside, exactly where you need it most? Many homeowners are looking for a way to make their homes more sustainable, but at the same time worry…

What if you could bring the sun's beneficial warmth directly indoors, exactly where you need it most? Many homeowners are looking for ways to make their homes more sustainable, but at the same time worry about complicated installations or disappointing heat output. It is a familiar challenge: you want a comfortable home, but would rather not see unsightly radiators on the wall anymore. An infrared wall panel offers the ideal solution by combining direct radiant heat with a modern design that is barely noticeable in your interior.

In this guide, we explain exactly how to make the right choice for your specific living situation, so you can make the switch to electric heating with confidence. We clear up the uncertainty regarding the required power per square meter and show how smart wall placement optimizes your energy consumption. From the technical wattage calculation to the most aesthetic finishes, you will discover everything needed for future-proof and stylish heating of your favorite rooms.

What is an infrared wall panel and how does this heating work?

Imagine sitting in the sun behind glass on a cold winter day. Despite the low outside temperature, you feel an immediate, pleasant glow on your skin. That is exactly the experience an infrared wall panel creates in your home. Instead of laboriously heating the air in a room, this panel emits invisible long-wave infrared rays. These rays travel through the space and directly heat the objects and people they encounter. To technically understand how an infrared panel works, it is essential to look at the transfer of energy via electromagnetic waves, where no airflow is needed to move heat.

At Warmteshop, we view this technology as the most natural way to heat. An infrared wall panel acts as a compact sun in your interior. It efficiently converts electrical energy into radiant heat, meaning you no longer have to wait for the entire room to fill with warm air before experiencing comfort. Because wall mounting ensures a horizontal distribution of the radiation, the heat is directed precisely to the areas where you live and work.

Radiant heat versus air heating

Traditional radiators work on the principle of convection. They heat the air, which then rises to the ceiling, cools down, and sinks back down. This process creates a constant airflow that disperses dust and pollen throughout the room. An infrared wall panel works differently. The radiation heats the walls, the floor, and the furniture. These objects retain heat much longer than air can. The result is a stable and healthy indoor climate without dry eyes or a stuffy feeling. Furthermore, the walls remain drier and warmer, effectively preventing the formation of condensation and mold.

Why choose wall mounting?

Wall mounting is a strategic choice for those seeking immediate comfort. The radiation travels horizontally through the room, which is ideal when placing the panel opposite a seating area or desk. You feel the warmth directly on your body, similar to the radiation from a cozy fireplace. Additionally, a wall panel offers aesthetic freedom. The slim design takes up hardly any space and can even be executed as a functional infrared mirror or a stylish glass panel. Moreover, installation is surprisingly simple; with a few brackets and a power outlet, your new infrared heater operational in no time.

What to look for when buying an infrared wall panel?

The step from orientation to purchase requires a keen eye for detail. After all, an infrared wall panel is more than just a stylish object; it is a technical instrument that must be precisely tailored to your living space. The success of your new heating system depends on the balance between the available capacity and the structural condition of your home. At Warmteshop, we are happy to guide you in making this smart choice, taking into account both facts and efficiency.

Calculating the required power

To avoid being left in the cold or consuming excessive energy, an accurate wattage calculation is crucial. In a modern, excellently insulated house, a capacity of 30 to 50 Watts per square meter is usually sufficient to comfortably heat a room. Do you live in a characteristic building with less insulation? Then take into account a need for up to 100 Watts per square meter to compensate for heat losses.

Also consider the distribution of heat. In larger rooms, two smaller panels on different walls often perform better than a single powerful panel. This ensures an even distribution of radiant heat and prevents 'cold corners'. Pay attention to the windows as well; glass reflects infrared radiation less effectively than a solid wall, meaning heat loss is greater with large windows without HR++ glass. Strategic placement of your infrared wall panel is therefore just as important as the wattage itself.

Quality and safety

Safety is never a point of discussion with electrical systems. Every high-quality wall panel must be equipped with reliable overheat protection that automatically switches off the system in the event of abnormal temperatures. This gives you peace of mind that the system operates safely even when you are not in the room. For use in damp areas, the IP rating is the determining factor. A panel with an IP44 certification is splash-proof and therefore safe to install in the bathroom. For more specific information regarding zones and installation guidelines, please consult our guide on electric bathroom heating .

In addition to technical specifications, the choice of material plays a role in the experience. Aluminium panels are lightweight and heat up extremely quickly, while glass panels and ceramic variants retain heat longer and give your interior a luxurious look. Would you like to experience for yourself which material best suits your needs? You can always visit one of our showrooms for personalized, tailored advice or view the various options in our infrared heating.

Various types of wall-mounted infrared panels

Nowadays, heating is much more than a purely functional necessity. With an infrared wall panel, you choose a solution that enriches your interior rather than disrupts it. While the technical basis of radiant heat remains the same, the finish varies from minimalist and unobtrusive to artistically pronounced. This makes it possible to find a panel for every room in the house that perfectly matches the atmosphere and function of that space.

The most popular variant is the standard white panel. Thanks to its slim design and neutral color, this type blends almost completely into a white wall. It is the ideal 'invisible' heat source for living rooms or bedrooms where the focus should remain on the furniture and decoration. But for those who dare to play with design, there are numerous other options that combine functionality with pure aesthetics.

Design panels as an interior element

An infrared photo panel transforms your heating system into a personal work of art. You can choose a beautiful landscape photo, an abstract pattern, or even your own holiday photo, which is printed razor-sharp on the surface. As a result, no one will notice that a powerful heating system is hanging on the wall. Another smart dual role is fulfilled by the infrared mirror. In the hallway, it offers a warm welcome, while in the bathroom it provides a major practical advantage: thanks to the direct heating of the glass surface, condensation stands no chance. You therefore always have a clear view, even immediately after a hot shower.

Functional variants for specific spaces

In spaces where people work or live, a panel can add extra value. An infrared chalkboard, for example, is a fantastic addition to the kitchen or a modern office. You can write menus, shopping lists, or use it for creative brainstorming sessions, while the panel keeps the room comfortably warm. For the bathroom, the infrared towel dryer an absolute favorite. This panel not only heats the room via radiation but also ensures that your towels are always dry and pleasantly warm.

The choice between glass and metal panels often depends on the desired look. Glass offers a high-gloss, luxurious finish that looks beautiful in modern homes, while metal panels often have a matte, more subtle texture. Whichever variant you choose, every infrared wall panel from Warmteshop is designed to last a lifetime without compromising on efficiency or beauty.

Placement and installation of your infrared wall heating

The effectiveness of an infrared wall panel depends on smart positioning. Because radiant heat works via a direct line of sight, similar to the sun's rays, it is essential that the panel can radiate freely into the room. A common mistake is hiding a panel behind a sofa or curtain. This blocks the heat waves, preventing the objects in the room from reaching them and drastically reducing efficiency. For an optimal experience, preferably mount the panel at eye level or slightly lower, so that the horizontal radiation directly warms your body while you sit or work.

Optimal positioning in the room

When determining the best location on the wall, you should take into account the radiation angle of approximately 160 degrees. In the living room, the wall opposite the seating area is often the most strategic choice. This way, you immediately enjoy the comforting warmth as soon as you sit down on the sofa. Avoid placement directly opposite a window. Although modern HR++ glass blocks a lot of heat, glass reflects infrared radiation less effectively than a solid interior wall. By directing the panel towards an interior wall, the opposite walls and the floor are heated, causing them to function as a mild heat source themselves.

Smart control and zone heating

One of the biggest advantages of infrared heating is the possibility of zone heating. Why heat the entire home when you are only in the office? By using advanced thermostats, you can control each room independently. This is where you make the real savings on your energy bill. With a programmable thermostat, you can easily set a schedule so that the panel is only active when you are actually using the room.

Modern Wi-Fi modules and smart home integrations make it possible to control your infrared wall panel even remotely via your smartphone. This way, you always come home to a preheated room without the heating having been on unnecessarily all day. The installation of the panels themselves is surprisingly simple and often completed within half an hour using the included brackets. However, for a seamless finish where the cables are invisibly concealed within the wall, we recommend hiring a professional installer. Are you ready to take your living comfort to the next level? View our full range of infrared panels and discover the perfect match for your interior.

Why buy your infrared wall panel from Warmteshop?

Since 2008, Warmteshop has been the undisputed market leader in the Benelux in the field of radiant heating. We did not achieve this position by chance; it is the result of years of innovation and a deep-rooted passion for sustainable living comfort. When you decide to purchase an infrared wall panel , you want the assurance that you are investing in quality that will last for decades. With our own stock of more than 5,000 panels, we guarantee not only fast delivery but also enormous freedom of choice in materials and wattages. We view the transition to green energy not as an obligation, but as a smart and comfortable upgrade for your home.

Our expertise goes beyond simply selling a product. Every home is unique and requires a specific approach. That is why our advisors always offer a customized heat calculation. We look at the insulation level of your walls, the height of your ceilings, and your personal lifestyle. This way, we prevent you from paying too much for energy costs or, conversely, missing out on that extra warmth on a cold winter day. It is our mission to guide you toward a system that does exactly what it promises: creating a healthy and comfortable indoor climate.

The certainty of a specialist

Choosing Warmteshop means choosing complete peace of mind. Our own certified technicians are ready to install your new heating safely and with utmost neatness. We understand that you will not settle for visible cables or a sloppy finish in your carefully designed interior. Our Trustprofile certification guarantees a reliable purchasing experience and transparent service. Furthermore, we offer extensive warranty conditions on all our wall panels, because we fully stand behind the durability of our products.

Visit a showroom in your region

Nothing is more convincing than experiencing for yourself the warmth that feels like the natural glow of the sun. With more than 30 physical showrooms in the Benelux, there is always a location near you where you can see the technology in action. In our showrooms, you will experience the difference between the dry air of a convector and the beneficial radiation of an infrared wall panel. Here, you can view and touch all finishes up close, from mirror glass to personalized photo panels. Our experts take the time for you and answer all your technical questions while you enjoy a cup of coffee. Would you prefer to explore your options online first? You can view all infrared wall panels in our extensive collection directly here.

Choose the heat of the future today

Switching to an infrared wall panel is a smart investment in a sustainable and stylish home. Thanks to direct radiant heat, you enjoy comfort comparable to natural sunlight while simultaneously optimizing your energy consumption. Whether you choose an unobtrusive white panel, a functional mirror, or an artistic photo panel, you create a healthy indoor climate without unsightly radiators or bothersome drafts.

At Warmteshop, we are ready to guide you through every step of this process. With more than 30 showrooms in the Benelux, you can come and experience the heat for yourself and receive personal advice based on an accurate heat calculation. Furthermore, thanks to our three large warehouses, we guarantee fast delivery of your order. It is time to say goodbye to outdated systems and choose the efficiency of tomorrow.

Discover the complete collection of infrared wall panels and order directly online

Turn your home into a warm, inviting place where design and sustainability go hand in hand.

Frequently asked questions about infrared wall heating

How much energy does an infrared wall panel consume on average?

The consumption of an infrared wall panel is directly related to the chosen wattage. A 1000-watt panel consumes exactly 1 kWh per hour that it is active at full power. Based on the average electricity price of €0.27 per kWh in 2026, an hour of heating will therefore cost you approximately 27 euro cents. Because a thermostat switches off the panel as soon as the desired temperature is reached, the actual consumption in practice is often significantly lower.

Can I install an infrared wall panel myself or do I need an electrician?

You can easily install a wall panel yourself using the included mounting brackets and a power outlet. The process is similar to hanging a heavy picture frame and requires little technical knowledge. However, if you want to conceal the wiring invisibly within the wall for a sleek finish, we recommend hiring a professional installer from Warmteshop to ensure safety and perfect aesthetics.

Does the back of an infrared wall panel get very hot?

The back of a high-quality wall panel does not become dangerously hot thanks to built-in insulation layers. Most of the heat is radiated from the front into the living space. Only minimal residual heat remains, which does not damage the wall. This makes it safe to mount the panels on virtually any type of wall material, provided you use the included spacers that ensure natural airflow behind the panel.

Is wall-mounted infrared heating suitable as primary heating?

Infrared heating is ideally suited as primary heating in specific, well-insulated rooms such as a bathroom or home office. According to the Dutch Building Decree, it is currently not permitted to be the sole heat source for an entire home. In practice, a wall-mounted panel performs best as a supplement to an existing system or as a primary source in rooms where you desire quick and targeted comfort without heating the entire house.

How long does it take for an infrared wall panel to emit heat?

An infrared wall panel typically emits its full radiant heat within 5 to 10 minutes. Therefore, you do not need to heat the room for hours in advance to make it comfortable. As soon as the surface reaches operating temperature, you feel the direct glow on your skin, similar to the sun's rays. This rapid response makes the system ideal for rooms that you do not use throughout the day.

What is the best place on the wall to hang an infrared panel?

The best place for an infrared wall panel is an interior wall directly oriented towards the zone where you spend the most time. Think of the wall opposite your favorite armchair or your desk. It is crucial that the radiation path is clear; therefore, do not place large cabinets or thick curtains directly in front of the panel. By directing the radiation onto an opposite wall or floor, the heat is optimally retained by the objects in the room.

Are wall-mounted infrared panels safe for children and pets?

Infrared panels are safe for children and pets, provided they are mounted at a sensible height. Although the surface does get hot, usually between 85 and 110 degrees, a brief touch does not immediately lead to serious burns. The reflex to withdraw the hand is faster than the heat transfer. By placing the wall mounting out of the direct reach of small children, you minimize any possible risk of accidents.

Can I repaint an infrared panel wall?

It is absolutely not permitted to paint over an infrared panel with normal wall paint. A layer of paint impedes the release of radiant heat and can overheat the internal components of the panel. This not only affects efficiency but also immediately invalidates your warranty. Do you want a specific color or a unique look? Then choose one of our glass design panels or a personalized photo panel that is finished at the factory.

Tags

sustainable living electric heating energy saving infrared panel wall infrared heating interior design radiant heat heating guide wall panels

• Share with:
• WhatsApp
• Part
• X
• Pin it
• Messenger
• E-mail

---