Why would you pay to heat thousands of cubic meters of air against a high ceiling, while your employees on the work floor are still suffering from the cold? For many entrepreneurs looking for the right **industrial…

Why would you pay to heat thousands of cubic meters of air against a high ceiling, while your employees on the work floor are still suffering from the cold? For many entrepreneurs looking for the right **industrial heating**, this is a daily reality. It is frustrating that HVAC systems often claim 40 to 60 percent of your total energy consumption, while traditional installations heat up slowly and struggle with enormous heat losses due to drafts and open doors.

You deserve a system that heats people and objects directly, rather than the air mass. In this article, you will discover how to optimally equip your warehouse with industrial infrared heaters and enjoy healthy warmth that feels like the natural radiation of the sun. We explain how smart zone heating drastically reduces your energy bill and how you can recover up to 30 percent of your investment through tax deductions. This allows you to make the switch to a gas-free, low-maintenance future that fully complies with the stricter environmental standards of 2026.

Key Points

• Learn how infrared technology directly heats objects and people instead of the air mass, allowing you to eliminate heat loss with high ceilings.
• Discover the ideal configuration for your industrial hall with the expertise of Industrial Heating Roeselare, ranging from powerful heaters to subtle panels.
• Analyze why zone heating is the key to a lower energy bill by only heating the areas where your staff is actually active.
• Understand how to make the transition to gas-free working with low-maintenance systems that fully comply with the strictest environmental standards of 2026.
• Gain insight into the optimal positioning and installation requirements of heaters to ensure maximum efficiency in large, draft-prone spaces.

What is industrial heating and why is the switch to infrared crucial?

The days when we simply filled enormous industrial halls with warm air are definitely behind us. In industrial environments in the West Flanders region, entrepreneurs often struggle with towering ceilings and constantly open gates. Traditional air heating fails completely here; after all, warm air rises directly to the roof, leaving the workspace cold while the energy bill mounts. Therefore, in the search for effective industrial heating in Roeselare, we are seeing a massive shift towards infrared technology.

Industrial infrared heating works fundamentally differently from convection heating. Instead of using the air as a means of transport, this system utilizes the direct transfer of energy via electromagnetic waves. This infrared heating technology ensures that heat is only generated the moment the rays strike an object or person. This is exactly the same principle as the sun, which gives you a warm feeling on a cold winter day as soon as you step into its rays. For large warehouses and workshops, this means that you no longer need to heat the entire cubic volume of the building to create a comfortable working environment.

The urgency of this transition is reinforced by current regulations. Since the tightening of climate targets in 2026, the phasing out of gas-fired systems in industry has accelerated. With the current maximum price for heating oil of €1.2527 per liter (for purchases of 2,000 liters or more) and rising gas connection costs, switching to infrared heating an immediate solution for both your wallet and the planet.

The physics behind industrial radiant heat

Infrared radiation is subdivided into different wavelengths. For industrial applications, we often use powerful short-wave (IR-A) emitters in drafty areas such as loading docks, while long-wave (IR-C) panels are ideal for constant heating in office spaces or showrooms. The crucial advantage is the radiance factor; objects and bodies retain heat much better than air. Once a concrete floor or workbench has been heated by the radiation, they act as a secondary heat source themselves. This creates a stable thermal mass that is much less susceptible to temperature fluctuations caused by drafts.

Sustainability and CO2 reduction in the business sector

Electric infrared systems play a key role in improving your EPC label or BREEAM score. Since April 1, 2026, buildings with an annual consumption of more than 1 GWh are required to install solar panels. By connecting your industrial heating in Roeselare to your own PV installation, you transform your business premises into an energy-neutral powerhouse. You not only reduce your CO2 footprint by tens of percent, but you also make your business operations independent of volatile fossil fuel prices. The result is a future-proof building that meets the strictest environmental standards without compromising on the comfort of your staff.

Various systems for industrial heating: From radiant heaters to panels

Not every industrial space places the same demands on climate control. While a warehouse with constantly open doors requires brute force, a showroom calls for a subtle, aesthetic approach. For optimal results in industrial heating in Roeselare, we make a clear distinction between infrared heaters and infrared panels. After all, choosing the right hardware determines whether you effectively manage the 40 to 60 percent of your energy consumption that goes to HVAC or simply waste it.

Sustainability in an industrial context means that equipment must withstand harsh conditions. That is why our systems are manufactured from high-quality stainless steel and equipped with polished reflectors that dissipate heat into the room with an efficiency of nearly 100 percent. In dusty workshops or damp loading docks, the IP (Ingress Protection) rating is crucial. An IP65 rating or higher guarantees that your investment will last for years without dust accumulation impairing operation. This focus on quality aligns seamlessly with the global trend towards renewable energy in industrial heating, where technical efficiency forms the absolute basis for every green transition.

Powerful infrared heaters for high halls

When dealing with ceilings of six meters or higher, short-wave (IR-A) heaters are the only logical choice. These units deliver immediate results, regardless of the airflow in the hall. Thanks to advanced "no-glare" technology, they produce pleasant warmth without the annoying bright red glow that characterizes older systems. This increases not only visual comfort but also workplace safety. View our complete collection of industrial air heaters and heaters for a solution that suits your specific ceiling height.

Infrared panels for offices and canteens

In secondary spaces such as canteens or administrative units, the focus is more on aesthetics and a healthy indoor climate. Infrared panels can be seamlessly integrated into suspended ceilings or mounted on walls, allowing them to operate virtually invisibly. Because these panels do not circulate the air, there is no airborne dust or allergens. This is a direct upgrade for your staff's well-being. By using wireless thermostats , you can control each room individually, preventing unnecessary consumption in unused rooms.

Are you curious which system yields the best return for your specific business activities? Our regional experts are happy to assist you with a customized calculation for your sustainable infrared solution.

Infrared versus traditional air heating: An efficiency analysis

Do you choose to heat your business premises by moving air or by heating matter specifically? This fundamental difference determines whether your industrial heating in Roeselare is an expense or a smart investment. Traditional systems, often based on gas-fired air heaters, take hours to bring a hall up to temperature. Infrared solutions, on the other hand, offer immediate results. As soon as you flip the switch, your employees experience the warmth, completely eliminating the need to preheat the premises hours before the start of the shift.

Another critical point in the efficiency analysis is maintenance. While complex gas boilers require annual inspections, filter replacements, and risky piping networks, Warmteshop’s electrical systems are virtually maintenance-free. There are no moving parts to wear out and no burners to become fouled. This translates into direct savings on operating costs and prevents unexpected downtime during the coldest months of the year.

Why warm air doesn't work in warehouses

The biggest problem with forced-air heating in high-ceilinged spaces is stratification. Warm air is lighter and rises immediately. In an average warehouse, this results in a temperature of 30 degrees near the ceiling, while it is barely 12 degrees on the factory floor. You are therefore literally paying for heat that nobody benefits from. Moreover, that precious warm air escapes immediately outside every time a door is opened. Infrared heating bypasses this problem through direct contact. The radiation heats the floor and the machines, which then slowly release the heat back into the surroundings without causing bothersome drafts.

Long-term operational cost savings

The financial logic behind the switch to electric will become increasingly strong in 2026. With an expected average spot price for electricity of €86/MWh and rising costs for fossil fuels, such as the current maximum price for heating oil of €1.2932 per liter for smaller volumes, efficiency is no longer a luxury. By using zone heating, you heat only the areas where work is actually being done, such as packing stations or assembly benches.

• Zone heating: Reduce energy consumption by leaving unused parts of the hall unheated.
• No heat loss: Maintain comfort, even when loading docks are constantly open for transport.
• Tax benefits: Take advantage of the investment deduction of 20 to 30 percent for environmentally friendly technologies.

Do you want to know exactly how much you can save by replacing your current air heating system? Our specialists offer a detailed return analysis for your industrial air heaters and radiant heaters, so that you make a decision based on facts.

Implementation in practice: Zone heating and installation requirements

How do you approach the installation of a system that puts people, not the air, at the center? When setting up an industrial heating project in Roeselare, everything revolves around strategic zoning. In a warehouse of, for example, 5,000 m², it is often pointless to keep the entire surface at 18 degrees. Zone heating enables you to heat specific workstations, such as packing tables or assembly points, in a targeted manner. As a result, your staff enjoys a comfortable working temperature, while the unused storage zones remain cooler. This immediately saves on your energy consumption without compromising the well-being of your team.

A successful implementation always begins with a professional heat calculation. In this process, we consider not only the surface area but also the building's insulation value and the frequency with which gates open. Furthermore, since December 31, 2024, it has been mandatory for non-residential buildings with a heating system exceeding 290 kW to be equipped with a building management system. Our infrared solutions align seamlessly with this requirement thanks to digital interfaces that enable accurate monitoring of consumption.

Step-by-step plan for an efficient installation

The process starts by mapping the "hot zones" in your business premises. These are the places where employees spend the majority of their time. Depending on the layout of your hall, we choose wall mounting or ceiling pendant mounting. With pendant mounting, we can position the heaters exactly above the workstation, maximizing radiation efficiency. For central control, we integrate smart-home Wi-Fi modules, allowing you to manage the entire building via a single interface.

• Height determination: The ideal mounting height varies between 3 and 6 meters for optimal distribution of radiant heat.
• Electrical infrastructure: We match the cabling and fuses to the peak load of the radiators.
• Positioning: Heaters are positioned to create an overlapping heat pattern for even comfort.

Regulation and automation

Unnecessary consumption is the biggest enemy of a low energy bill. That is why we make extensive use of motion sensors in zones where staff are only present occasionally. As soon as an employee enters the zone, the infrared heating switches on immediately. In combination with programmable thermostats, you can set heating schedules that exactly match your shifts. This type of automation is becoming even more important, as the threshold for mandatory building automation will be further lowered to 70 kW in 2029.

Optimize your operations and schedule your installation today with our advanced industrial radiation modules for maximum efficiency in your hall.

The future of your business premises with the expertise of Warmteshop

The energy transition is no longer a distant prospect, but a current reality that demands expert guidance. If you are looking for industrial heating in Roeselare, you will find a partner in Warmteshop who understands the complexity of large spaces. We look beyond just the hardware; we design a total solution that strengthens your business operations. Our systems mimic the natural, healthy heat of the sun. This not only increases efficiency but also has a direct positive impact on your team's comfort. In our physical showrooms, you can experience this unique radiant heat for yourself and receive immediate answers to all your technical questions from our experts.

Whether you manage a small-scale workshop or a gigantic logistics center, customization is the only way to achieve a real return. A standard approach often ignores the specific airflows or the unique thermal mass of your premises. By choosing a partner with a local presence in West Flanders, you are assured of a system that performs optimally even in extreme cold and integrates seamlessly with your existing infrastructure.

Personal advice and heat calculations

A well-thought-out plan begins with a detailed scan of your property. Our experts analyze your current energy consumption and identify where the greatest savings can be achieved. We guide you from the initial calculation to the final professional installation by certified technicians. Infrared heating center stage here as the most flexible and future-proof solution. The result is an installation that grows with your ambitions and contributes directly to carbon-neutral operations without the need to invest in complex piping networks.

Frequently asked questions about industrial projects

Entrepreneurs often have legitimate questions regarding the practical aspects of switching to electric. Fire safety, for example, is a top priority; our industrial blasters are specifically designed for dusty environments with high IP ratings and built-in protection against overheating. Regarding financing, various incentive measures will be available in 2026. Through the Ecologiepremie+, you can count on subsidies ranging from 20 to 40 percent of the investment for energy-saving technologies. In addition, tax investment deductions make it possible to recover another 20 to 30 percent of the costs through tax deductions.

The payback period for an average warehouse is typically between 3 and 5 years, depending on the intensity of use. Given the long lifespan of our systems and the elimination of annual inspection costs, the long-term ROI is undeniable. Are you ready to start your industrial heating project in Roeselare ? Visit one of our showrooms for a tailored consultation and discover how we can accelerate your energy transition.

Take the step towards a future-proof and welcoming business premises today

The transition to a gas-free warehouse or workshop in 2026 is a smart strategic choice that yields immediate returns. By focusing on heating people and objects instead of the air, you put an end to the enormous energy waste that characterizes traditional systems. You have discovered how zone heating and smart automation not only increase comfort but also drastically reduce your ecological footprint while you enjoy healthy warmth that feels like the sun.

For your specific needs regarding industrial heating in Roeselare, Warmteshop offers the necessary authority and experience. Since 2008, we have been the market leader in the Benelux and are fully specialized in high-quality, energy-efficient infrared technology. With more than 30 physical stores, there is always an expert advisor near you to guide you through every step of your energy transition.

Request a free heat calculation for your business premises from Warmteshop and let yourself be convinced by a tailored solution that meets all modern environmental standards. We look forward to creating a sustainable and comfortable working environment together with you.

Frequently asked questions about industrial heating

Is infrared heating suitable for a warehouse with a lot of drafts?

Yes, infrared heating is ideally suited for drafty warehouses because it heats not the air, but directly the objects and people present. With traditional systems, the warm air blows straight outside as soon as a gate opens. With radiant heat, the energy remains stored in the floor and the bodies of your staff. This makes it the most efficient choice for logistics centers where loading docks are often open for transport.

How many industrial blasters do I need per square meter?

The number of heaters depends heavily on the ceiling height and the desired temperature on the work floor. For effective industrial heating in Roeselare, we calculate an average output between 100 and 150 Watts per square meter for active workspaces. In high halls exceeding 6 meters, we more frequently install powerful heaters of 3,000 Watts or more. An exact calculation by our experts prevents undercapacity and guarantees optimal efficiency.

What is the difference between short-wave and long-wave infrared for industrial use?

Short-wave infrared (IR-A) delivers intense, direct heat that is unaffected by wind, making it ideal for open loading zones. Long-wave infrared (IR-C) operates more gently and is perfect for enclosed spaces such as canteens or assembly halls with lower ceilings. While short-wave emitters may produce a faint glow, long-wave panels operate completely invisibly. The choice therefore depends entirely on the specific function and environmental factors of the zone.

Can I combine infrared heating with my current ventilation system?

Infrared heating operates completely independently of your ventilation system, which is a major advantage for efficiency. Because radiant heat does not require air circulation to distribute heat, you do not lose energy through your ventilation exhaust ducts. This ensures a healthier indoor climate without dust displacement. You can use the ventilation purely for necessary air exchange, while the infrared heaters ensure a constant thermal balance in the workplace.

How much can I save on my energy costs by switching to infrared?

Companies save an average of 40 to 60 percent on their energy bills by switching from traditional gas heaters to infrared zone heating. This saving stems from the fact that you only heat where and when it is needed. Instead of heating the entire air mass, you focus on the zones where work is actually being done. Combined with current electricity prices in 2026, this results in a very short payback period for your investment.

Is the installation of industrial infrared heaters complicated?

Installation is significantly simpler than that of gas-fired systems because no piping network or fuel storage is required. Our heaters require only a stable electrical connection and can be mounted using wall or ceiling brackets. This minimizes downtime during installation. Furthermore, our systems comply with the building automation legislation of December 31, 2024, allowing them to be directly connected to modern management systems for your industrial heating in Roeselare.

Are infrared panels safe for employees who stand under them all day?

Absolutely, infrared radiation is a completely natural form of heat comparable to the healthy radiation of the sun. It promotes blood circulation and does not cause dry eyes or respiratory irritation from airborne dust. Employees often experience a higher level of comfort because the floor and objects feel pleasantly warm. Our panels have been extensively tested and comply with all European safety standards for long-term industrial use in a professional work environment.

Does Warmteshop also offer maintenance contracts for industrial systems?

Because our infrared systems contain no moving parts, filters, or burners, periodic maintenance is virtually unnecessary. You save annually on the costs of mandatory inspections that are required for gas boilers. Should a technical problem unexpectedly occur, our team of experts is ready to provide prompt service. This low-maintenance feature makes infrared the most reliable choice for the continuity of your business operations without unexpected operating costs.

Tags

industrial heating Roeselare

• Share with:
• WhatsApp
• Part
• X
• Pin it
• Messenger
• E-mail

---