Antifreeze mats and cables

The Termofol TF-CW-SR1m is a high-quality, self-regulating heating cable specifically designed to effectively protect water pipes and pipelines from freezing. Thanks to its intelligent self-regulating technology, the cable automatically adjusts its output to the ambient temperature. This keeps the pipe frost-free, without the risk of overheating and without the need for an external thermostat. This heating cable is suitable for drinking water pipes, easy to install, and ideal for both residential and commercial applications. Key Benefits: Self-regulating capacity: Automatically adjusts the heating output (10 W/m²) based on the temperature. Energy-efficient and safe: Consumes energy only where needed and prevents overheating. No thermostat required: Fully autonomous operation thanks to self-regulating technology. Suitable for drinking water: Approved for direct contact with drinking water pipes. Flexible installation: Can be installed both internally in the pipe and externally under insulation. Technical specifications Property Specification Model TF-CW-SR1m Length 1 meter Power 10 W per meter Supply voltage 230 V / 50–60 Hz Maximum operating temperature +65°C Minimum installation temperature −25°C Minimum bending radius 3.5× cable diameter Protection class IPX8 Application Pipes up to 2" diameter Connection cable 2.5 meters Installation options 🔹 Internal installation (in the pipe) Ideal for buried or hard-to-reach pipes Does not affect existing insulation 🔹 External installation (on the pipe) Cable is mounted along or spirally on the pipe Always finish with thermal insulation for optimal efficiency Tip: Make sure the pipe is clean and dry and fasten the cable securely with suitable tape or fasteners. Applications Homeowners – Frost protection of water pipes in garages, crawl spaces and holiday homes Commercial buildings – Pipes in warehouses, industrial halls and technical rooms Agriculture & recreation – Irrigation systems, water tanks and outdoor pipes Conclusion The Termofol The TF-CW-SR1m self-regulating antifreeze heating cable offers a reliable, energy-efficient, and safe solution to prevent pipes from freezing. Thanks to its easy installation, potable water compatibility, and automatic operation, this cable is ideal for both permanent and seasonal applications.

Read more less

The TERMOFOL TF-KZT-375-25 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-375-25 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 375 W Length 25 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-375-25 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-360-24 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-360-24 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 360 W Length 24 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-360-24 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-300-20 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-300-20 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 300 W Length 20 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-300-20 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-270-18 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-270-18 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter: 15 W/m Total power: 270 W Length: 18 meters Cable diameter: 6 mm Thermostat: Built-in Installation On pipe or tank Maintenance: Maintenance-free Installation advice: Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-270-18 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-225-15 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-225-15 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 225 W Length 15 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-225-15 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-210-14 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-210-14 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 210 W Length 14 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-210-14 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-180-12 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-180-12 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 180 W Length 12 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-180-12 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-150-10 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-150-10 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 150 W Length 10 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm thick). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-150-10 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-120-8 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-120-8 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 120 W Length 8 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-120-8 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-90-6 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-90-6 is designed for mounting on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable should be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 90 W Length 6 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-90-6 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less

The TERMOFOL TF-KZT-75-5 is a high-quality antifreeze heating cable specially developed to protect pipes, valves, and tanks from freezing, even during severe winters. This heating cable is ideal for use in unheated spaces, technical installations, and outdoor applications where frost damage poses a significant risk. Thanks to the built-in thermostat, the cable switches on automatically when the temperature drops. This eliminates the need for external control or a separate thermostat, making installation simple, safe, and maintenance-free. Key Benefits: Effective frost protection. Protects water pipes, valves, and tanks from freezing and ice formation. Built-in thermostat. Automatic operation without additional controls or sensors. Easy installation. The cable is mounted directly to the pipe or tank and then insulated. Maintenance-free system. Once installed, the cable operates fully automatically. Wide range of applications. Suitable for homes, holiday homes, garages, technical rooms, and outdoor installations. Application The TERMOFOL TF-KZT-75-5 is designed for installation on: Water pipes Shut-off valves and taps Tanks and reservoirs The cable must be installed under thermal insulation of at least 10 mm to ensure optimal heat retention. Technical specifications Property Specification Type Antifreeze heating cable Power per meter 15 W/m Total power 75 W Length 5 meters Cable diameter 6 mm Thermostat Built-in Installation On pipe or tank Maintenance Maintenance-free Installation advice Install the heating cable directly onto the pipe or tank. Secure the cable with suitable tape or fasteners. Then apply thermal insulation (at least 10 mm). Connect the cable to a 230 V power supply in accordance with applicable regulations. Have electrical connections made by a certified installer. Conclusion The TERMOFOL TF-KZT-75-5 antifreeze heating cable is a reliable, efficient, and user-friendly solution for keeping pipes and tanks frost-free. Thanks to the built-in thermostat and easy installation, this system is ideal for both residential and professional applications.

Read more less